Fugly autumn weathers, typical of this time of year, of course, no complaint, just an observation.
Gonna be a work-a-day for Ol’ Dio. Muchos to be done, but wanna slow start up, no stress, no rush, do it right, McGyver to my best.
And what the hay, do domestics while I’m at it. Laundry at Unks ol’place. the washer is slow, but by Dawgum, it does a far better job at getting my mucky-grungy clothes clean. (newer model than Da’s 30yo unit.) I’ll be in and out of there most of the day since I moved the welder over there yesterday. Kept inside, under lock and key away from BadCuz,,, Yeah, in the living room: me such a redneck! LOL (the beauty of that, Unk has a ramp off the front stoop: much easier to bring it out where I can use it.)
Ordered electronic components to build a controller. Still have my old bread board for design/prototyping (honestly, Forgot I even had one!!!) And I have several options available for the motors: really it all boils down to amps and volts at this stage. Or should I say stages as one is low volt (3-9)and the other is high(12-24). Total cost in order was $27, and I ordered the bulk packs of 10 /20 each (was less than individuals) I’ll have extra for later projects of whatever comes down my way.
I rilly miss RadioShack,,, Anyone else on that bandwidth?

Busted into my library as well. Mostly digi stuff in that book, but enough analog stuff that I can make this work. No real designs (past the educational projects) but enough good info to work up what I need. Found that one at halfprice books in Cincy and snagged it years back. Glad I did. Even then, it was almost $10. You can probably find a copy on the Zon, and pay over $30 for it now. (and I do believe he added another further edition with more projects later down the road. Good stuff, well laid out and HORRID puns included.)(updated for links: not as expensive as I thought, and second edition is a different author. )
I’m more mechanically inclined. I just dabble in the electronics. I understand how to use digi stuff, but analog makes more sense to me, even when it does Wyrd things. After years in the audio field, believe me, I’ve seen some truly strange electronic behaviors. (Phantom power leaking through Bakelite, causing signal crosstalk across 24 channels! Seen it! HEARD IT, still no understanding of WHY,,, or HOW.)
Todays list is to set the incline adjuster (latitude adjustment) and Figure some mechanical stops so the thing gets limited longitudinal sweep. I hadn’t built them in. None of this is blueprinted; all of it is rednecked ‘make it work’, straight out of the pocket and a bit of ‘well, That needs fixed before something comes apart in the wind.’ Solar panels are really good at pretending to be sails. Gotta lock them down tight, but you still want things loose enough to be able to move.
And since I probably am getting VERY limited power production today, I will move the rest of the panels over, and the wiring in. Gonna be much easier digging the trench for the conduit since its been wet the last 18 hours. I’ll use a ratchet strap to secure the array while I build the controller for the linear actuator. That whole ‘wind can do bad things’ in mind while she sits and waits.
y’all take care today, Pics will be posted as I remember to take them, and I’ll be back later (or tomorrow) with more
Love y’all
Live
Love
Laugh
LEARN
LOAD!!!
(, ‘)
The loss of Radio Shack really put a hurting on hobbyists and amateur engineers. I still have a small stash of LEDs and resistors and a few odds n ends that I guard like a religious fanatic at a temple gate and use very sparingly. And I try to pull usable components from scrappage, but when I’m loading the trailer I’m less fussy so I usually don’t get maximum harvest…
I don’t like ordering online because the descriptions aren’t as detailed as I like when I’m designing stuff but it’s make do with what’s available.
I’m looking forward to the pictures of the final setup and your final assessment of the project. Your experience is a free education for me! Thanks.
LikeLiked by 2 people
“me such a redneck”
Ya say that like it might be a bad thing!😉🙃😁 NO way!😉
Yeah, really miss The Shack meself, I do.
L’s!
Y’all take care,
Mike in FLA.
LikeLiked by 1 person
In some areas being called a redneck is a compliment. And when the fecal matter is in contact with the air circulation appliance one redneck can accomplish more than a thousand well intentioned idiots with useless doctorates…
When the collapse really gets up to speed the playing field will shift in a completely different tilt. The conversations will sound like: “Well there ain’t no government inspector here right now Bubba and the kids are cold and hungry, make it work somehow.”
If there is a beauracrat around: “Well just what and your shiny clipboard gonna do about it fella? Hunh? Oh yeah? Well you just go ahead and call them on that non-functional phone mister. Beat it, I’ve got work to do.”
Yup, the playing field will get a lot closer to level on that day.
LikeLiked by 2 people
Around here, my level of redneck makes me stand out like a neon sign in White Sand NM. Check out my redneckin’ in the next post and you’ll see what I mean
LikeLike